دليل التتبيث في الويندوز#

This guide describes how to download, install and encrypt the Dash Core wallet for Windows. The guide is written for Windows 10, but the steps should be similar for other versions of Windows.

تحميل محفظة داش كور#

Visit https://www.dash.org/downloads/ to download the latest Dash Core wallet. In most cases, the website will properly detect which version you need. Click Download Installer to download the installer directly.

../../../../_images/download2.png

يكتشف الموقع بشكل صحيح المحفظة المناسبة لنظامك#

If detection does not work, you will need to manually choose your operating system. Once you know which version you need, download the Dash Core Installer to your computer from https://www.dash.org/downloads/ and save the file you downloaded to your Downloads folder.

ملاحظة

Dash Core 0.17 was the last release to provide downloads for 32-bit Windows installations. As of Windows 11, Microsoft only provides 64-bit Windows.

If you are unsure whether your version of Windows is 32-bit or 64-bit, you can check by following the instructions here.

تحقق من داش كور#

This step is optional, but recommended to verify the authenticity of the file you downloaded. This is done by checking its detached signature against the public key published by the Dash Core development team. To download the detached signature, click the Installer Signature button on the wallet download page and save it to the same folder as the downloaded binary.

All releases of Dash since 0.16.0 are signed using GPG with the following key:

Download the key file above. Install Gpg4win if it is not already available on your computer. Once it is installed, open the Kleopatra certificate manager and click File -> Import. Import the key file and verify the Key-ID matches the ID above.

../../../../_images/setup-windows-kleopatra-import.png

Importing Pasta's GPG public key#

Skip any requests to certify the certificate with your own key. Next, click Decrypt/Verify... and select the detached signature file named dashcore-20.0.4-win64-setup.exe.asc in the same folder as the downloaded installer.

../../../../_images/setup-windows-kleopatra-verify.png

Selecting the signature file for verification#

If you see the first line of the message reads Verified dashcore-20.0.4-win64-setup.exe with dashcore-20.0.4-win64-setup.exe.asc then you have an authentic copy of Dash Core for Windows.

../../../../_images/setup-windows-kleopatra-verified.png

Example of successful binary installer verification#

The following video demonstrates the steps to install Gpg4win and then verify the Dash Core installation file signature.

تشغيل مثبت داش كوري#

انقر نقرًا مزدوجًا فوق الملف لبدء تثبيت داش كور.

../../../../_images/106328792.png

مثبت داش كور في مجلد التنزيلات#

في هذه المرحلة ، قد ترى تحذيرًا من الشاشة الذكية في الويندوز أن التطبيق غير معروف. يمكنك تخطي هذا التحذير بأمان عن طريق النقر مزيد من المعلومات ، ثم تشغيل على أي حال.

../../../../_images/106328818.png
../../../../_images/106328813.png

تجاوز الشاشة الذكية في الويندوز لتشغيل التطبيق. يُعرف هذا التحذير بأنه "إيجابي كاذب".#

بعد ذلك سيرشدك المثبِّت خلال عملية التثبيت

../../../../_images/106328844.png

شاشة الترحيب من مثبت برنامج داش كور#

انقر خلال الشاشات التالية. يمكن ترك جميع الإعدادات في قيمها الافتراضية ما لم يكن لديك سبب محدد لتغيير شيء ما.

../../../../_images/106328866.png

حدد موقع التثبيت#

../../../../_images/106328871.png

حدد مجلد قائمة ابدأ#

../../../../_images/106328876.png

بدأ تنزيل داش كور#

../../../../_images/106328881.png

تم التتبث بنجاح#

شغل داش كور لأول مرة#

Once installation is complete, Dash Core will start up immediately. If it does not, click Start > Dash Core > Dash Core to start the application. The first time the program is launched, you will be offered a choice of where you want to store your blockchain and wallet data. Choose a location with enough free space, as the blockchain can reach 45GB+ in size. It is recommended to use the default data folder if possible.

../../../../_images/106328945.png

إختار مجلد داش كور#

ثم تبدأ داش كور. سيستغرق ذلك وقتًا أطول قليلاً من المعتاد في المرة الأولى التي تقوم بتشغيلها ، حيث يحتاج داش كور إلى إنشاء بيانات تشفير لتأمين محفظتك.

../../../../_images/106328960.png

بدأ داش كور#

تزامن داش كور إلى شبكة داش#

بمجرد تثبيت داش كور وتثبيته بنجاح ، سترى شاشة نظرة عامة على المحفظة. ستلاحظ أن المحفظة "غير متزامنة" ، وسيظهر شريط الحالة في أسفل النافذة تقدم المزامنة.

../../../../_images/dashcore-syncing1.png

تبدأ داش كور جار المزامنة مع شبكة داش#

During this process, Dash Core will download a full copy of the Dash blockchain from other nodes to your device. Depending on your internet connection, this may take a long time. If you see the message “No block source available”, check your internet connection. When synchronization is complete, you will see a small green tick in the lower right corner.

../../../../_images/dashcore-synced-and-encrypted1.png

تم انتهاء مزامنة داش كور#

You can now create a wallet to send and receive funds.

Creating your Dash Wallet#

Beginning with Dash Core 19.0, a wallet will not be created for you by default. You will get this prompt in the Overview tab. To create a wallet, click the Create a new wallet button or click File -> Create Wallet. Non-HD wallets are created by default. See the advanced topics section for information about HD wallets.

../../../../_images/dash-create-wallet-prompt2.png

You will be prompted to create a new wallet with a custom wallet name. By default, your wallet will be encrypted. You may choose to uncheck the box and encrypt the wallet later. We have included instructions on how to encrypt your wallet in the following section.

../../../../_images/dash-name-wallet1.png

If you do choose to encrypt now, you will be asked to enter and verify a password.

../../../../_images/dash-encrypt-wallet1.png

أدخل الرقم السري#

Following that, you will get a standard warning.

../../../../_images/dash-encrypt-wallet-confirmation1.png

تأكيد لتشفير محفظتك#

The following section will detail the steps you need to follow if you choose to encrypt your Dash wallet later.

تشفير محفظتك داش#

لتشفير محفظتك ، انقر على الإعدادات> تشفير المحفظة.

../../../../_images/dashcore-settings-encrypt1.png

تشفير محفظة داش بالرقم السري#

سيُطلب منك إدخال الرقم السري والتحقق منها

../../../../_images/dash-encrypt-wallet1.png

أدخل الرقم السري#

../../../../_images/dash-encrypt-wallet-confirmation1.png

تأكيد لتشفير محفظتك#

When the encryption process is complete, you will see a warning that past backups of your wallet will no longer be usable, and be asked to shut down Dash Core. When you restart Dash Core, you will see a small green lock in the lower right corner.

../../../../_images/dashcore-synced-and-encrypted1.png

مشفرة تماما ومتزامنة داش كور المحفظة#

يمكنك الآن البدء في استخدام محفظتك لإرسال الأموال وتلقيها بأمان.