Linux Installation Guide#

This guide describes how to download, verify, install and encrypt the Dash Core wallet for Linux. The guide is written for Ubuntu 20.04 LTS, but the steps should be similar for other Linux distributions.

대시 코어 지갑 다운로드 하기#

Visit https://www.dash.org/downloads/ to download the latest Dash Core wallet. In most cases, the website will properly detect which version you need. Click the Dash Core button to download the package directly.

../../../../_images/download.png

웹사이트는 당신의 시스템에 맞는 적절한 지갑을 감지합니다.#

If detection does not work, you will need to manually choose your operating system and whether you need an x64 (64 bit x86) or ARM version. If you are unsure about your version of Linux, you can check in Ubuntu using the Terminal:

uname -m

If the response is x86_64, download Dash Core x64. If the response is aarch64, download Dash Core ARM. Once you know which version you need, download the Dash Core TGZ file to your computer from https://www.dash.org/downloads/ and save it to your Downloads folder.

참고

Since Dash Core 18.0, downloads are not available for 32-bit Linux installations.

대시 코어 검증하기#

This step is optional, but recommended to verify the authenticity of the file you downloaded. This is done by checking its detached signature against the public key published by the Dash Core development team. To download the detached signature, click the Signature button on the wallet download page and save it to the same folder as the downloaded binary.

All releases of Dash since 0.16.0 are signed using GPG with the following key:

Open a terminal, import the key and verify the authenticity of your download as follows:

curl https://keybase.io/pasta/pgp_keys.asc | gpg --import
gpg --verify dashcore-20.0.4-x86_64-linux-gnu.tar.gz.asc
../../../../_images/setup-linux-gpg.png

Downloading the PGP key and verifying the signed binary#

If you see the message Good signature from ... then you have an authentic copy of Dash Core for Linux.

참고

If you have your own key configured, you can eliminate warnings from the verification output by signing the imported key before verifying:

gpg --quick-lsign-key "29590362EC878A81FD3C202B52527BEDABE87984"
gpg --verify dashcore-20.0.4-x86_64-linux-gnu.tar.gz.asc

Extracting Dash Core#

Dash Core for Linux is distributed as a compressed archive and not an installer. This is because this same archive also contains other files built for running a masternode on a server, for example. In this guide, we will extract the executable file with a graphical user interface (GUI) designed for use by end users as a wallet.

Extract Dash Core as follows:

tar xzf dashcore-20.0.4-x86_64-linux-gnu.tar.gz

This will create a folder named dashcore-20.0.4 in the current working directory. We will now install the executable binaries to /usr/local/bin using the install command:

sudo install -m 0755 -o root -g root -t /usr/local/bin dashcore-20.0.4/bin/*

Start Dash Core from the terminal with the following command:

dash-qt

The first time the program is launched, you will be offered a choice of where you want to store your blockchain and wallet data. Choose a location with enough free space, as the blockchain can reach 45GB+ in size. It is recommended to use the default data folder if possible.

../../../../_images/106329842.png

대시 코어 데이터 폴더 선택하기#

이후 대시 코어가 실행될 것입니다. 첫 실행 시에는 다소 긴 시간이 소요되는데, 이는 대시 코어가 당신의 지갑을 안전하게 보호하기 위하여 암호화된 데이터를 생성하기 때문입니다.

../../../../_images/dashcore-splash.png

대시 코어 시작하기#

대시 코어와 대시 네트워크 동기화하기#

대시 코어가 성공적으로 설치 및 시작되는 경우, 당신은 지갑 개요 화면을 보게 될 것입니다. 또한 당신의 지갑이 동기화 되지 않은 상태임을 확인할 수 있으며, 또한 창의 하단 상태 바에서 동기화 진행 상황을 보실 수 있습니다.

../../../../_images/dashcore-syncing.png

대시 코어가 대시 네트워크와 동기화를 진행하고 있습니다.#

During this process, Dash Core will download a full copy of the Dash blockchain from other nodes to your device. Depending on your internet connection, this may take a long time. If you see the message “No block source available”, check your internet connection. When synchronization is complete, you will see a small green tick in the lower right corner.

../../../../_images/dashcore-synced.png

대시 코어 동기화가 완료되었습니다.#

이제 당신은 당신의 지갑을 이용하여 자금을 보내고 받을 수 있습니다.

Setting up a desktop entry#

You can set up an XDG Desktop Entry in order to be able to launch Dash Core from your KDE or Gnome desktop environment. To do so, create a file named ~/.local/share/applications/dash.desktop and add the following content:

[Desktop Entry]
Version=1.5
Name=Dash Core
Comment=Dash Core is used to interact with the Dash blockchain
Exec=/usr/local/bin/dash-qt
Icon=dash-icon
Terminal=false
Type=Application

Ensure the file is executable:

chmod +x ~/.local/share/applications/dash.desktop

An appropriate icon can optionally be downloaded from the Dash Brand Guidelines page:

wget https://media.dash.org/wp-content/uploads/dash-d-rounded-square-250.png
xdg-icon-resource install --size 256 dash-d-rounded-square-250.png dash-icon

Creating your Dash Wallet#

Beginning with Dash Core 19.0, a wallet will not be created for you by default. You will get this prompt in the Overview tab. To create a wallet, click the Create a new wallet button or click File -> Create Wallet. Non-HD wallets are created by default. See the advanced topics section for information about HD wallets.

../../../../_images/dash-create-wallet-prompt.png

You will be prompted to create a new wallet with a custom wallet name. By default, your wallet will be encrypted. You may choose to uncheck the box and encrypt the wallet later. We have included instructions on how to encrypt your wallet in the following section.

../../../../_images/dash-name-wallet.png

If you do choose to encrypt now, you will be asked to enter and verify a password.

../../../../_images/dash-encrypt-wallet.png

암호문을 입력합니다.#

Following that, you will get a standard warning.

../../../../_images/dash-encrypt-wallet-confirmation.png

당신이 지갑을 암호화하고 싶은 것이 맞는지 확인합니다.#

The following section will detail the steps you need to follow if you choose to encrypt your Dash wallet later.

당신의 대시 지갑 암호화하기#

To encrypt your wallet, click Settings > Encrypt wallet.

../../../../_images/dashcore-settings-encrypt.png

대시 지갑을 암호문으로 암호화하고 있습니다.#

암호문을 입력하고 확인하십시오.

../../../../_images/dash-encrypt-wallet.png

Entering a password#

../../../../_images/dash-encrypt-wallet-confirmation.png

당신이 지갑을 암호화하고 싶은 것이 맞는지 확인합니다.#

When the encryption process is complete, you will see a warning that past backups of your wallet will no longer be usable, and be asked to shut down Dash Core. When you restart Dash Core, you will see a small green lock in the lower right corner.

../../../../_images/dashcore-synced-and-encrypted.png

대시 코어 지갑이 완전히 암호화되고 동기화되었습니다.#