윈도우 설치 가이드#

This guide describes how to download, install and encrypt the Dash Core wallet for Windows. The guide is written for Windows 10, but the steps should be similar for other versions of Windows.

대시 코어 지갑 다운로드 하기#

Visit https://www.dash.org/downloads/ to download the latest Dash Core wallet. In most cases, the website will properly detect which version you need. Click Download Installer to download the installer directly.

../../../../_images/download2.png

웹사이트는 당신의 시스템에 맞는 적절한 지갑을 감지합니다.#

If detection does not work, you will need to manually choose your operating system. Once you know which version you need, download the Dash Core Installer to your computer from https://www.dash.org/downloads/ and save the file you downloaded to your Downloads folder.

참고

Dash Core 0.17 was the last release to provide downloads for 32-bit Windows installations. As of Windows 11, Microsoft only provides 64-bit Windows.

If you are unsure whether your version of Windows is 32-bit or 64-bit, you can check by following the instructions here.

대시 코어 검증하기#

This step is optional, but recommended to verify the authenticity of the file you downloaded. This is done by checking its detached signature against the public key published by the Dash Core development team. To download the detached signature, click the Installer Signature button on the wallet download page and save it to the same folder as the downloaded binary.

All releases of Dash since 0.16.0 are signed using GPG with the following key:

Download the key file above. Install Gpg4win if it is not already available on your computer. Once it is installed, open the Kleopatra certificate manager and click File -> Import. Import the key file and verify the Key-ID matches the ID above.

../../../../_images/setup-windows-kleopatra-import.png

Importing Pasta’s GPG public key#

Skip any requests to certify the certificate with your own key. Next, click Decrypt/Verify… and select the detached signature file named dashcore-20.0.4-win64-setup.exe.asc in the same folder as the downloaded installer.

../../../../_images/setup-windows-kleopatra-verify.png

Selecting the signature file for verification#

If you see the first line of the message reads Verified dashcore-20.0.4-win64-setup.exe with dashcore-20.0.4-win64-setup.exe.asc then you have an authentic copy of Dash Core for Windows.

../../../../_images/setup-windows-kleopatra-verified.png

Example of successful binary installer verification#

The following video demonstrates the steps to install Gpg4win and then verify the Dash Core installation file signature.

대시 코어 인스톨러 실행하기#

대시 코어를 설치하기 위해 파일을 더블클릭 하십시오.

../../../../_images/106328792.png

다운로드 폴더의 대시 코어 인스톨러#

이 단계에서 당신은 윈도우 스마트스크린(SmartScreens)으로부터 이 응용 프로그랩을 인식할 수 없다는 경고를 받을 지 모릅니다. 이 경우 더 알아보기, 그리고 계속 실행하기를 클릭함으로써 이 경고를 안전하게 통과할 수 있습니다.

../../../../_images/106328818.png
../../../../_images/106328813.png

이 응용 프로그램을 실항하기 위해서 윈도우 스마트스크린을 우회합니다. 이 경고 메시지는 ‘긍정 오류’라고도 알려져 있습니다.#

그 다음에는 인스톨러가 당신을 설치 과정으로 안내할 것입니다.

../../../../_images/106328844.png

대시 코어 인스톨러 환영 화면#

다음의 화면에 따라 클릭합니다. 당신이 설정을 변경하기 위한 특정한 이유가 있지 않은 한, 모든 설정은 기본값으로 둘 수 있습니다.

../../../../_images/106328866.png

설치 경로를 지정합니다.#

../../../../_images/106328871.png

시작 메뉴 폴더를 선택합니다.#

../../../../_images/106328876.png

대시 코어가 설치되고 있습니다.#

../../../../_images/106328881.png

설치가 완료되었습니다.#

처음으로 대시 코어 실행하기#

Once installation is complete, Dash Core will start up immediately. If it does not, click Start > Dash Core > Dash Core to start the application. The first time the program is launched, you will be offered a choice of where you want to store your blockchain and wallet data. Choose a location with enough free space, as the blockchain can reach 45GB+ in size. It is recommended to use the default data folder if possible.

../../../../_images/106328945.png

대시 코어 데이터 폴더 선택하기#

이후 대시 코어가 실행될 것입니다. 첫 실행 시에는 다소 긴 시간이 소요되는데, 이는 대시 코어가 당신의 지갑을 안전하게 보호하기 위하여 암호화된 데이터를 생성하기 때문입니다.

../../../../_images/106328960.png

대시 코어 시작하기#

대시 코어와 대시 네트워크 동기화하기#

대시 코어가 성공적으로 설치 및 시작되는 경우, 당신은 지갑 개요 화면을 보게 될 것입니다. 또한 당신의 지갑이 동기화 되지 않은 상태임을 확인할 수 있으며, 또한 창의 하단 상태 바에서 동기화 진행 상황을 보실 수 있습니다.

../../../../_images/dashcore-syncing1.png

대시 코어가 대시 네트워크와 동기화를 진행하고 있습니다.#

During this process, Dash Core will download a full copy of the Dash blockchain from other nodes to your device. Depending on your internet connection, this may take a long time. If you see the message “No block source available”, check your internet connection. When synchronization is complete, you will see a small green tick in the lower right corner.

../../../../_images/dashcore-synced-and-encrypted1.png

대시 코어 동기화가 완료되었습니다.#

You can now create a wallet to send and receive funds.

Creating your Dash Wallet#

Beginning with Dash Core 19.0, a wallet will not be created for you by default. You will get this prompt in the Overview tab. To create a wallet, click the Create a new wallet button or click File -> Create Wallet. Non-HD wallets are created by default. See the advanced topics section for information about HD wallets.

../../../../_images/dash-create-wallet-prompt2.png

You will be prompted to create a new wallet with a custom wallet name. By default, your wallet will be encrypted. You may choose to uncheck the box and encrypt the wallet later. We have included instructions on how to encrypt your wallet in the following section.

../../../../_images/dash-name-wallet1.png

If you do choose to encrypt now, you will be asked to enter and verify a password.

../../../../_images/dash-encrypt-wallet1.png

암호문을 입력합니다.#

Following that, you will get a standard warning.

../../../../_images/dash-encrypt-wallet-confirmation1.png

당신이 지갑을 암호화하고 싶은 것이 맞는지 확인합니다.#

The following section will detail the steps you need to follow if you choose to encrypt your Dash wallet later.

당신의 대시 지갑 암호화하기#

지갑을 암호화하기 위해서는 설정>지갑 암호화 를 클릭하십시오.

../../../../_images/dashcore-settings-encrypt1.png

대시 지갑을 암호문으로 암호화하고 있습니다.#

암호문을 입력하고 확인하십시오.

../../../../_images/dash-encrypt-wallet1.png

암호문을 입력합니다.#

../../../../_images/dash-encrypt-wallet-confirmation1.png

당신이 지갑을 암호화하고 싶은 것이 맞는지 확인합니다.#

When the encryption process is complete, you will see a warning that past backups of your wallet will no longer be usable, and be asked to shut down Dash Core. When you restart Dash Core, you will see a small green lock in the lower right corner.

../../../../_images/dashcore-synced-and-encrypted1.png

대시 코어 지갑이 완전히 암호화되고 동기화되었습니다.#

이제 당신은 지갑을 이용하여 자금을 안전하게 보내고 받을 수 있습니다.