الإرسال المخفي و الإرسال الفوري

الإرسال المخفي

This documentation describes how to use Dash Core to send Dash privately. PrivateSend, released as DarkSend in RC4 of the DarkCoin client and rebranded to PrivateSend in May 2016, is a trustless method of running a sequence of transactions (known as "mixing") such that an external observer is unable to determine the source of funding when a PrivateSend transaction is created. This gives your Dash the same privacy properties as cash withdrawn from an ATM, for example. The mixing and denomination process is seamless, automatic, and requires no intervention on the part of the user. The current implementation of PrivateSend in the Dash Core wallet allows any amount of Dash to be mixed for later use in PrivateSend transactions. As of December 2018, PrivateSend is not currently available in other Dash wallets.

معرفة العدد الدقيق لجولات الخلط الإرسال المخفي المستخدمة في أي صفقة الإرسال المخفي معين تأثير قابل للقياس الكمي على الثقة التي قد يواجهها الخصم عند محاولة تخمين مصدر معاملة الإرسال المخفي. لهذا السبب ، يتم تعيين عدد الموصى به (والافتراضي) لجولات خلط الإرسال المخفي إلى أربعة.

يمكنك قراءة المزيد عن نظرية الإرسال المخفي والعمليات هنا.

إدارة الإعدادات

  1. افتح محفظة داش كور ، وانتقل إلى الإعدادات واختر أدوات. انتقل إلى علامة المحفظة.

    ../../_images/privatesend-options.png
  2. Next to PrivateSend rounds to use, enter a value between 1-16. Each round of PrivateSend performs one denominated fund mixing transaction. Higher numbers of rounds increase your overall level of privacy while decreasing the chance of detection via node collusion. 16 is the highest number of rounds currently available.

    NOTE: To prevent system abuse, an average of one in ten rounds of masternode mixing incurs a fee of .0001 DASH.

  3. Enter a target value for Amount of Dash to keep mixed. This value provides a lower boundary on the final amount of funds to be mixed. Depending on how the client splits your wallet balance, you may end up with denominated inputs whose sum total is greater than the target amount. In this case the client will use all existing denominated inputs in the PrivateSend process. The final mixed amount may be higher than your target, but should be close.

  4. إظغط على أوكي لحفظ الإعدادات.

  5. يتم تعطيل الإرسال المخفي بشكل افتراضي عند فتح المحفظة. سيبدأ فقط بعد تعيين عدد الجولات وعدد الداش للخلط تحت إعدادات وانقر فوق بدء خلط في علامة نظرة عامة في محفظتك.

بدأ الخلط

تبدأ عملية الإرسال المخفي بالنقر فوق الزر بدء الخلط في علامة نظرة عامة في محفظة داش كور. الاختلاط ممكن بمجرد استيفاء الشروط التالية:

  • The wallet contains sufficient non-mixed funds to create the minimum required denominated values
  • لم يقم المستخدم بتعطيل الإرسال المخفي في مربع الحوار خيارات
  • The target value for mixed Funds in the Options dialog is greater than zero

إذا كانت محفظتك مشفرة (موصى به للغاية) ، سيُطلب منك إدخال عبارة المرور الخاصة بك. تمكين خانة الاختيار فقط للخلط عبر الإرسال المخفي لفتح المحفظة للاختلاط فقط.

../../_images/mixing-password.png

إدخال كلمة مرور لدمج الإرسال المخفي فقط

سيؤدي هذا إلى فتح محفظتك ، وستبدأ عملية خلط الإرسال المخفي. ستبقى المحفظة مفتوحة حتى اكتمال خلط الإرسال المخفي ، وعند هذه النقطة سيتم قفله تلقائيًا.

../../_images/mixing.png

واجهة الإرسال المخفي بعد النقر على زر بدأ الخلط. لاحظ أن الحالة هي ممكّنة.

سيبدأ الإرسال المخفي في إنشاء معاملات وسيزداد تدريجياً رصيد الإرسال المخفي الخاص بك. قد تستغرق هذه العملية بعض الوقت ، لذا كن صبورًا. يمكنك مراقبة العملية بمزيد من التفصيل كما هو موضح في القسم التالي.

أي من الإجراءات التالية سيؤدي إلى مقاطعة عملية الخلط. نظرًا لأن المعاملات ذرية (إما أنها تتم بالكامل ، أو لا تحدث على الإطلاق) ، فيمكن أن يكون من الممكن مقاطعة خلط الإرسال المخفي بأمان في أي وقت.

  • النقر فوق الزر إنهاء الخلط في علامة انظرة عامة
  • اكتمال إغلاق العميل قبل خلط الإرسال المخفي
  • يتم إرسال أموال الإرسال المخفي من المحفظة قبل انتهاء جولات الإرسال المخفي
  • تعطيل الإرسال المخفي قبل اكتمال العملية

مراقبة الاختلاط

إذا كنت ترغب في مراقبة الإرسال المخفي بمزيد من التفاصيل ، فستحتاج إلى تمكين بعض الميزات المتقدمة للمحفظة. انتقل إلى الإعدادات ، حدد خيارات وانتقل إلى علامة المحفظة. حدد المربعات المجاورة لميزات تمكين ميزات التحكم في العملة و تمكين واجهة الإرسال المخفي المتقدمة.

../../_images/privatesend-settings.png

تمكين الخيارات المتقدمة لـ الإرسال المخفي في إعدادات محفظة داش كور

سيسمح لك ذلك بمراقبة التقدم ومعرفة العمليات الفردية التي يقوم بها الإرسال المخفي في الخلفية.

../../_images/mixing-progress.png

رصد تقدم الإرسال المخفي

Since PrivateSend mixing creates a lot of new address keys to send and receive the mixed denominations, you may receive a warning when the number of remaining keys runs low. This is nothing to be worried about, since the wallet will simply create more keys as necessary. However, these keys will not exist in any previous backups of your wallet. For this reason, it is important to backup your wallet again after mixing is complete.

يمكنك أيضًا مراقبة تقدم الإرسال المخفي عن طريق عرض المعاملات التي أنشأتها عملية الخلط في علامة المعاملات.

../../_images/privatesend-transactions.png

المعاملات التي تم إنشاؤها بواسطة الإرسال المخفي على علامة المعاملات

يصف الجدول التالي المعاملات ذات الصلة الإرسال المخفي المعروضة في عمود النوع من علامة المعاملات.

نوع المعاملة الإرسال المخفي وصف العملية
الإرسال المخفي جعل المدخلات الجانبية (خلط) تم تحويل أموال المحفظة إلى مدخلات الضمانات التي سيتم استخدامها في سداد مدفوعات الضمانات. يتم ذلك للحد من إمكانية تتبع الضمانات.
الإرسال المخفي إنشاء فئات (خلط) تم تقسيم أموال المحفظة إلى فئات الإرسال المخفي (الخطوة 1 هنا)
تسمية الأرسال المخفي (خلط) تم إرسال معاملة إلى ماسترنود للمشاركة في جلسة خلط (الخطوة 3 هنا)
الإرسال المخفي الدفع الجانبي (خلط) تمت المطالبة بمزج ضمانات الجلسة. يتم فرض هذه الرسوم في ~ 10٪ من جلسات الخلط لمنع هجمات البريد العشوائي.
الإرسال المخفي (الأنفاق) تم استخدام صناديق مختلطة لإرسال دفعة لشخص ما. ملاحظة: على عكس أنواع المعاملات 4 السابقة ، هذه ليست معاملة عملية خلط.

You can also use the coin control feature to view which addresses hold mixed denominations ready to be used for PrivateSend transactions. Go to the Send tab of your wallet and click Inputs to view the possible input addresses for your transactions. You can see how each address holds given denominations of mixed Dash, and how many rounds of mixing have been completed. This is to ensure that an efficient combination of addresses can be used as inputs in PrivateSend transactions without too much change, since amount in a PrivateSend transaction must be rounded up to completely spend all inputs. The current minimum balance for an input used in a PrivateSend transaction is 0.00100010 DASH.

../../_images/privatesend-addresses.png

مربع حوار تحديد العملة الذي يعرض العناوين التي تحتفظ بأرصدة الإرسال المخفي المختلطة في فئات مختلفة

الدفع عن طريق الإرسال المخفي

You can only use PrivateSend for payments once you have mixed enough Dash to make up the amount you are trying to send. Because the mixing process takes time, it must be done in advance before you create the send transaction. A PrivateSend transaction is effectively the same as any other transaction on the blockchain, but it draws only from input addresses where the denomination has previously been mixed to ensure privacy of funds. Because several input addresses are usually required to make up the amount you are trying to send, a PrivateSend transaction will usually take up more space (in kilobytes) on the blockchain, and therefore will be charged a slightly higher fee.

To send a payment using PrivateSend, go to the Send tab of the Dash Core wallet and enable the PrivateSend option. The balance displayed will change to show your PrivateSend balance instead of the total balance. You can then enter the Pay To address, Label, Amount and click Send as usual. Your payment will be rounded up to completely spend the lowest possible denomination of mixed balance available (currently to the nearest 0.001 DASH). You will be prompted to enter your password and receive a detailed breakdown of the fee structure for PrivateSend before sending.

../../_images/privatesend-send.png

داش كور جاهز لإرسال معاملة الإرسال المخفي. ملاحظة تم تمكين الإرسال المخفي والمبلغ الذي سيتم إرساله أقل من رصيد الإرسال المخفي المتوفر

إرسال فوري

المقدمة

توضح هذه الوثائق كيفية استخدام الإرسال الفوري لإرسال الأموال على الفور إلى أي مستخدم داش آخر حول العالم. يتم دعم داش الإرسال الفوري من قبل العديد من المحافظ والبائعين ، بما في ذلك (على سبيل المثال لا الحصر) ما يلي:

  • محفظة داش كور
  • محفظة الدش في الأندرويد
  • محفظة داش في الأيفون
  • محفظتي لداش
  • Kraken
  • Bitrefill
  • و أكثر من ذلك بكثير...

يمكنك قراءة المزيد عن نظرية وعمليات الإرسال الفوري هنا.

إدفع عن طريق الإرسال الفوري

InstantSend functions by setting a flag on the transaction, causing deterministic selection of a quorum of 10 masternodes for each input spent in an InstantSend transaction. The masternodes examine the input, and if a majority determines it has at least six confirmations, they then accept the transaction. The input is then locked until the transaction has been confirmed in six mined blocks, at which point the output can be used as an input in another InstantSend transaction. This differs from inputs used in normal transactions, which can be spent after just one confirmation regardless of whether the Dash was received using InstantSend or not. A higher fee will be charged for InstantSend transactions with more than four inputs, according to the fee schedule. Note that the receiving wallet must also be aware of InstantSend in order to be able to immediately continue with the transaction or display an appropriate notification that the transaction should be considered locked. If the receiving wallet is not aware of InstantSend, it will simply appear as a normal transaction and you will need to wait for standard block confirmations.

للدفع باستخدام الإرسال الفوري ، ما عليك سوى التحقق من مربع الاختيار المناسب في تطبيقك. توضح لقطات الشاشة التالية أين يمكن العثور على هذا الإعداد في محافظ داش كور و الأيفون و الأندرويد.

../../_images/instantsend-android.png ../../_images/instantsend-ios.png
../../_images/instantsend-dashcore.png

داش محافظ تظهر خيار الإرسال الفوري